Style Machine Assistance

When the TASSIMO STYLE shows a red light next to 'calc', it's time to descale your coffee machine. Follow the steps below or watch the video on how to descale TASSIMO STYLE.

1. To descale your TASSIMO STYLE coffee machine, you'll need 2 Bosch TASSIMO descaling tablets, a container of min. 17 fl. oz. (500 ml), and a cloth for cleaning.

2. Take the water tank from the back of your TASSIMO STYLE machine and fill with water up to the marking 'calc' (spray icon). Add the two descaling tablets and wait until they are fully dissolved. Place the water tank back in the machine.

3. Remove the Service Disc (the orange disc) from the bottom right side of your TASSIMO STYLE machine. Place the Service Disc where your normally place your coffee pod, with the barcode facing down. Also, don't forget to remove the cup stand.

4. Place the container under the machine and press and hold the start/stop button for about 5 seconds. Once the descaling cycle starts, the status and descaling displays will flash.

5. After approximately 30 minutes, the status (cup icon) and descaling (spray icon) displays will light up. You've now completed the first stage of the descaling cycle. Now, empty the container and clean the water tank with a soft cloth.

6. Fill the water tank to the maximum mark and place it back. Then, place back the empty container and press the start/stop button briefly to start the cleaning program.

7. The status light (cup icon) will flash during cleaning. Once it lights up permanently, the program is done. Empty the container and repeat the same cleaning program (from step 6) 2 more times to make sure all the descaling solution is gone.

8. Once finished, remove the Service Disc and stow away in the bottom right of your TASSIMO STYLE again. Fill the water tank with fresh water and place it back into the machine. Your TASSIMO STYLE is now ready to make your favourite drink!

Cleaning your TASSIMO STYLE regularly will give you the best quality coffee, espresso and hot chocolate. Want to know how to clean your TASSIMO STYLE? Watch the video or follow the 5 steps below.

1. To clean your TASSIMO STYLE coffee machine, you'll need a soft cloth and a container of at least 9 fl. oz. (250 ml).

2. Unplug the machine and remove the cup stand. Remove and disassemble all removable parts from the machine: disassemble the cup stand, the T DISC holder and the pressing device from the head of the machine. Clean disassembled parts under running water or in a dishwasher. Then clean the brewing unit, the barcode scanner window and the nozzle. Assemble the pressing device back together and insert back in place before inserting the T DISC holder and the cover. Plug the machine back in and turn the power on.

3. Remove the water tank and clean it with a soft cloth. Fill the water tank up to the maximum mark and insert it back into your TASSIMO STYLE coffee machine.

4. Now remove the Service Disc from the bottom right of your machine and place it into your TASSIMO STYLE, where you normally place your T DISC (with the barcode facing down). Place a container of at least 9 fl. oz. (250 ml) under your machine and press the start/stop button. The TASSIMO cleaning cycle will now start.

5. When the display light stops flashing and is lit continuously, the cleaning cycle is finished. Empty the container and place the Service Disc back in the machine again. Fill the water tank with fresh water and place it back. Your TASSIMO STYLE is completely clean and ready to make your favourite drink again.

TASSIMO STYLE not only looks great on your kitchen counter, but also makes delicious drinks. You do need to set up your coffee machine first. Follow the steps below or watch the video to learn how to use your Bosch TASSIMO STYLE coffee machine.

1. Haven't used your TASSIMO STYLE in a while or is it the first time you're using it? Clean it with the cleaning cycle before use.

2. To make a cup of coffee, tea, or hot chocolate with your TASSIMO STYLE, make sure the coffee machine is plugged in, the power is on and the water tank is filled.

3. Place a mug, cup, or coffee glass on the cup stand.

4. Open the head of the coffee machine.

5. Insert a T DISC (the official TASSIMO coffee pods) of your choice with the barcode facing down.

6. Close the head again and press the start/stop button. The INTELLIBREW™ technology will recognize the barcode and serve your drink perfectly at the touch of a button!

We are always happy to help! Do you have any questions regarding your Bosch TASSIMO STYLE coffee machine? Below you can find the frequently asked questions for TASSIMO STYLE. Can't find an answer? Have a look at our Troubleshooting page or contact our customer service.

Why does my TASSIMO STYLE show a red light?

Does your TASSIMO STYLE show a red light next to the marking 'calc' (spray icon)? This means you need to descale your coffee machine. Is it the status display (cup icon) that shows a red light? This is the error light. Please check if you inserted a T DISC, if the machine was closed properly and if the barcode scanner was clean. More info on red lights and other error lights can be found in the 'TASSIMO lights' section on the Troubleshooting page.

Where can I buy TASSIMO STYLE pods?

All T DISCs, the official TASSIMO pods, are compatible with your Bosch TASSIMO STYLE coffee machine. There are no specific TASSIMO STYLE pods, all TASSIMO pods fit in your TASSIMO STYLE. Buy your T DISCs online or in your local supermarket.

Why is my TASSIMO STYLE not showing any light?

If your TASSIMO STYLE is not showing any lights, it's probably in idle mode. Press the start/stop button. Still not working? Check the power supply. Please contact our customer service if this issue persists.